Another consideration when looking at on-camera light systems and their mounting capabilities is their ability to use accessories. If you shoot a lot of interviews using the on-camera light as your key light, you will need a mounting mechanism that enables you to use barndoors, add diffusion gels or scrims, use softboxes or light diffusion panels or add color correction filters or gels.

Lighting reporters requires controllable lights, so you are not also lighting up distracting backgrounds or over-lighting the reporter and losing all of the background, so they appear to be standing in a blank wilderness. When shooting weddings, you need to control the light on the bride's face without causing the wedding gown to glow. By using a graduated scrim, barndoors or a graduated neutral density filter, you can reduce the amount of light falling on the dress while lighting her face with a soft diffused light.

These accessories are essential for controlling the light and giving you a light that is soft, controlled and more like a traditional key light. The combination of a soft diffused on-camera light mounted on an arm that lifts the light above and to the side of the camera will eliminate the "deer-in-the-headlights" look you often get when using a standard on-camera light.

The Power Source
The power source for the on-camera light is very important. Lights that use the power from the camera's battery suck that battery dry very quickly. If you use an on-camera light system all of the time, it only makes sense to find a system that uses an external battery pack. Lights that plug into a battery belt or small clip-on battery pack last longer, and don't drain your camera. However, battery belts can be extremely heavy.

Now That You Have It, How Do You Use It?
Shooting with an on-camera light is not as easy as it sounds. Yes, it is ready to go everywhere you and your camera go, but just like winter weather, it is fickle. If you get too close to your subject, you can cause the face to glow and the eyes to squint. Step back and recompose your shot. You might only need to bounce the light off the ceiling.

On-camera lights can also be a bit unwieldy. If you are shooting handheld, make sure that you tighten the hand strap extra tight. You might also consider using a monopod if you need the maneuverability. If you are using a tripod, you may notice that the balance of your camera is thrown off by the on-camera light. Re-balance your base plate on the tripod to compensate.

Now Go Shoot!
As you can see, just like the January cold, the on-camera light does have its uses. Examine your needs, choose your system, practice with the accessories and go to work! Add a bit of sparkle to your subject's eye on those cold January days.

[1] [2]